background image

5

Safety and Warranty

connected to an adequate ground.

 

IMPORTANT:

 A special interlock device avoids the start of the machine. Test its function by pushing the 

lower closing handle, in its ‘OFF’ position. The handle should move forward and then automatically come 

back.

ATTENTION:

 Never take off and tamper with the safety and protection devices. The machine must be use only 

with the safety and protection device correctly installed.

DANGER:

 Always use the product pusher to cut. This operating system is safe and meets the required 

regulations. Never push meat with your hands.

    The bandsaw must be operated only with the blade guard closed.

    

Any person in the vicinity of the machine should not wear loose clothes or opened sleeves.

    

No other person should be near the bandsaw machine during its working.

    

Use protective gloves to assemble or replace the blades.

●    In the event of replacing parts, request only original spare parts.

    When the machine is used with the adjustable blade guide (optional), never work with the blade guide 

     upwards but always put it down on to the goods to be cut.

●    Do not remove the labels placed on the machine and replace them if damaged by qualified personnel.

GENERAL DELIVERY CONDITIONS

The machine is always delivered with its packaging. The packaging materials (cardboard, polyethylene sacks, 

expanded polyurethane) are to be considered city waste materials. Even though each material must not be 

collected separately, it should be disposed of with consideration.

DELIVERY CONDITIONS

Check on delivery that the packaging is unbroken and that the goods correspond to those described on the 

order or the delivery note. In case of error, inform the shipper immediately. Remove the bandsaw from the 

package and the machine must be placed by two operators on a stable base to support its weight.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty. 

Summary of Contents for BS-IT-1981-S





















Reviews: