6
Technical Specifications
Model
BS-IT-1981-S
Blade Length
78” / 1981 mm
Cutting Capacity (H*W)
11” x 9.25” / 279 x 235 mm
Power
1.5 HP / 1.12 kW
Electrical
110V / 60Hz / 1Ph
Weight
167 lbs. / 75.7 kg.
Packaging Weight
175 lbs. / 79.4 kg.
Dimensions (DWH)
33.85” x 26” x 36.61” / 859.79 x 660 x 929.9 mm
Packaging Dimensions
38” x 30” x 42” / 965 x 762 x 1066.8
Item Number
10275
Installation
The machine must be installed near to a mains socket, check that the electrical supply corresponds to the data
on the label and that it is supplied with an adequate ground. Pay attention at the supply cable, it must not be a
hindrance during the work.
DIRECTION CONTROL
Switch the motor on briefly and make sure that the blade turns in a clockwise direction. If the rotation is
opposite, invert the plug polarity.
The bone saw can be supplied with three different versions of supports.
•
Support feet:
The bone saw must be mounted
horizontally on a stable and rigid work-table adequate
to support its weight. Choose the bone saw working
position and make two holes of Ø 12 mm on the
work-table at a distance of 245 mm. Use 2 M10 studs
long enough to ensure a fixing of at least 15 mm on the machine, with 2 large washers and 2 nuts.
•
Stand:
Lay down the machine, fix the two legs and the drilled plate and the bone saw using the supplied
Safety and Warranty
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
