Omcan 45219, Instruction Manual, Page: 20 / 44

20
Maintenance
SHUTTING DOWN AND DRAINING
1. Turn the power switch into draining position.
2. Remove the overflow pipe.
Attention: Do not remove the surface screeners and internal filters if the tank is not empty.
3. Press the start button to start a draining cycle.
If a second draining is needed start a new cycle by pressing the start button.
4. Remove the surface filters and clean them under running water.
Attention: DO NOT use any metal sponge to scratch the filters or the dishwasher surface.
5. Remove the suction filter and the draining filter and clean them under running water.
6. Put the power switch no1 into off position.
7. Replace the filters and overflow pipe
DAILY MAINTENANCE OPERATION.
• Turn the power switch off.
• Empty the wash tank by removing the overflow standpipe.
• Rinse the washing compartment to remove any dirt residues.
• Remove and clean the large pump filter.
• Reassemble the parts in reverse order.
Never operate the dishwasher without the wash pump filter
properly in place.
MAINTENANCE / CARE / REPAIR
Proper operation and safe use may be ensured only through the
correct use of the appliance, as well as the compliance with the
operation instructions, the corresponding specifications and the care
and cleaning indications.
Notice: Before maintenance, other than daily interior cleaning, power
and water supply to the machine must be turned off. The appliance
should never be sprayed with water or high pressure cleaning solution, because any water or solution in the
electrical elements will affect operation of the appliance as well as provide a potential for serious electrical
shock.
No safety systems should be disabled.