Omcan 45219, Instruction Manual, Page: 16 / 44

16
Installation
AUTOMATIC FILLING OF DETERGENT
This model has an automatic detergent pump for use with a container of non foaming liquid detergent. The
detergent pump is a peristaltic regulated (looks exactly like the rinse-aid pump) and can be regulated by a
screw above and on the right of the glass cover. The regulation can be from 0 lt/hour to 3,0 lt/hr.
MANUAL FILLING OF DETERGENT
Use only non-foaming detergent suitable for commercial dishwashers. In the event of non use or malfunction
of the automatic detergent injection system, put the detergent suppliers recommended amount directly into the
wash compartment tank after the machine has reached its operating temperature.
The correct dosage depends on the water hardness and the amount of residue on the dishes. Follow the
detergent manufacturer’s recommendations. Less detergent deters good washing results and more detergent
usually does not provide better results, but rather more unnecessary consumption and environment pollution.
SCREENERS (SURFACE FILTERS) - OVERFLOW PIPE - SUCTION FILTER - DRAIN
FILTER
To remove the surface filters first align the rinse and washing arms with the middle filter support and then
lift.
Do not remove the surface screeners and internal filters if the tank is not empty