Omcan 45219, Instruction Manual, Page: 14 / 44

14
Installation
ELECTRICAL CONNECTION
Attention: Before make any electrical connection or service, disconnect the main electrical supply and
lock it out in order to clearly indicate that there is work in progress.
I. Open the lower front cover (2 bolts).
II. Open the top cover of electrical circuit.
III. Connect the cable to the terminal block (Attention: strain relief knockout must be placed by the
installer).
Caution: 15 cm loop of wire must be left inside the machine in order to allow servicing.
IV. Replace the top cover.
V. Replace and secure the lower front cover.