14/50
D877 MGB Rev01 HE250.docx
2.11 Working cycles parameters
UP
Upward command input
DW
Downward command input
HSP
Upward high speed command input (Downward also
when Par. 453 = 0)
MSP
Maintenanans and V2 speed
(command combined with high speed command when
Par.454=1)
SP3
Downward high speed command input
(when Par. 453 = 1)
MOT
Motor pump input (corresponding to AVV output relay)
ENR
Solenoid valve ENR input
ERS
Solenoid valve ERS input
(For signal and device management see section 02312)
P3
DOWNWARD PARAMETERS
P301 Downward initial acceleration change rate
P302 Downward accelation distance (m, ft)
P303 Downward final acceleration change rate
P304 Downward high speed (m/s, fpm)
P305 Second downward high speed (maintenance) (m/s, fpm)
P306 Third downward high speed (m/s, fpm)
P307 Downward initial deceleration change rate
P308 Downward deceleration distance (m, ft)
P309 Second downward deceleration distance (m, ft)
P310 Third downward deceleration distance (m, ft)
P311 Downward final deceleration change rate
P312 Downward low speed (m/s, fpm)
P313 Downward stopping distance (m)
P314 Downward releveling acceleration distance (m, ft)
P315 Downward releveling speed (m/s, fpm)
P316 Downward releveling stopping distance (m, ft)
P317 Fourth downward high speed (m/s, fpm)
P318 Fourth downward deceleration distance (m, ft)
(dX) Display on DSP during phase execution
P2
UPWARD PARAMETERS
P201 Upward initial acceleration change rate
P202 Upward accelation distance (m, ft)
P203 Upward final acceleration change rate
P204 Upward high speed (m/s, fpm)
P205 Second upward high speed (maintenance) (m/s, fpm)
P206 Third upward high speed (m/s, fpm)
P207 Upward initial deceleration change rate
P208 Upward deceleration distance (m, ft)
P209 Second upward deceleration distance (m, ft)
P210 Third upward deceleration distance (m, ft)
P211 Upward final deceleration change rate
P212 Upward low speed (m/s, fpm)
P213 Upward stopping distance (m)
P214 Upward releveling acceleration distance (m, ft)
P215 Upward releveling speed (m/s, fpm)
P216 Upward releveling stopping distance (m, ft)
P217 Fourth upward high speed (m/s, fpm)
P218 Fourth upward deceleration distance (m, ft)
(uX) Display on DSP during phase execution
