46
Press the SEND TO LINE button.
Press LOAD on the OM2501A to start
loading.
You can see the loading progress on the bar
graph
You will see this screen after the firmware
was successfully loaded
Usually, it takes about 30 seconds but
sometimes it might take a little bit longer.
NOTE:
Do not take any action until this
screen disappears!
At the end you will return to the main screen of OM2501A. Switch PA OFF, disconnect the TCVR
serial cable and you are ready to use the OM2501A with the new firmware.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
