21
The “Tube Heating Timer” is visible
on the display. Wait until the required
180 seconds is complete before
placing the amplifier in OPERATE
Mode.
After heating is completed, the PA will
light the
STBY
mode indicator and this
Main display
will appear.
NOTE: If CAT or ANTENNA settings
are populated the associated windows
will reflect these settings.
Depending on
CAT
settings you would
have two possible situations illustrated. If
NO CAT
was saved, the above display will be visible. To
manually set band and segment for transmitting, use
BAND
and
SEGMENT
buttons. In this mode
exact frequency will be read from RF input and PA will set up on it automatically.
COM. LOST appears if CAT was defined but TCVR is not connected with the PA (CAT cable). See
the following pictures.
FREQ
button has two functions. It
allows
displaying
the
working
frequency or active band segment.
NOTE: If CAT is used the working
frequency will be read directly from
the TCVR.
Use
ANTENNA
(left/right) to select
one of the preprogramed antenna for
that band.
Type of supported TCVR and
working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
