15
Screen shows settings possibilities for
CAT, ANTENNA, DISPLAY, NETWORK
SETTING, EBS, BLOWER and other
INFO.
Scroll to
CAT SETTINGS
(up or down)
and
press
SET.
Scroll to your TCVR family (up or down)
select appropriate bit rate (left or right)
then press
SET.
Or select
NO CAT
and press
SET
.
We recommend using the CAT
connection whenever possible because, in such a case, the OM2501A (OM3501A) has permanent
information about the transmit frequency and is immediately ready for transmitting.
With a setting of NO CAT the OM2501A (OM3501A) detects transmit frequency from the input signal.
With the input signal frequency changing the PA automatically reacts and tunes itself to optimal
output parameters.. If NO CAT is used, we recommend using BAND DATA (BCD) information for
much faster band changing
.
If you choose
YAESU
or
ICOM
NEW,
after
SET
pressing you will go to deeper
level which allows you to select specific
type of TCVR.
ee the following picture for
ICOM NEW selection, for example.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
