![background image](http://html1.mh-extra.com/html/olympus/vt1621-01/vt1621-01_instructions-manual_4309203061.webp)
59
3
Shooting Close-up
For close-up shots, use the macro mode
which allows you to bring the camera as
close as 20 cm (8 in.) from the subject. For example, you could accurately capture the
details of a flower’s petals, pistils, and stamens.
To set the camera in the macro mode, press and hold
down the macro button
, turn the main dial or sub
dial until you see the macro mark
in the control
panel, and then take the picture.
Note
• With the camera set for TELE, you can bring the camera
as close as 20 cm (8 in.) from the subject to photograph
an area about the size of a business card, or
approximately 76 x 57 mm (3 x 2.3 in.). (
➞
42)
• There is a greater possibility of camera shake spoiling a
picture, so try to steady the camera as much as possible,
or use a tripod.
• Use as fast a shutter speed as possible to prevent the
wind or other movement from causing the subject to blur.
• If you use the flash in some situations, the lens barrel
could cause a shadow in the picture.
• For close up shots, you may find it convenient to pull out
the monitor and compose the picture in the monitor.
(
➞
37)
• For best results in close-up shots, you may want to use
the optional Macro Extension Lens Pro (MCON-35).
(
➞
133)
Cannot focus the shot?
Using Autofocus (AF) (
➞
64)
Capturing stages of a flower blooming
You can use time-lapse photography to set up shooting
multiple exposures at pre-set intervals to capture the stages
of a flower blooming, or other slow changes over a long
period.
Using Time-Lapse Photography (
➞
118)
Shot in macro TELE mode
Shot in macro wide-angle mode