![background image](http://html1.mh-extra.com/html/olympus/vt1621-01/vt1621-01_instructions-manual_4309203110.webp)
108
3
4
5
ON
OFF
2
1
6
Displaying the Histogram
A histogram can display the distribution of brightness of the image displayed for
playback. The histogram feature is switched on with a menu selection.
Switching the histogram display on and off
Follow this procedure to switch the histogram display on or off.
1
Set the mode dial to the setup/
connection mode mark
.
2
Press the menu button
.
The menu opens in the monitor.
3
On the arrow pad, press
or
to move the green highlight to the
histogram mark
.
4
On the arrow pad, press
to
move the green highlight to the
right.
5
On the arrow pad, press
to
move the green highlight to ON.
If you want to switch off the histogram, just
leave OFF selected.
6
Press the
button to select the
setting.
The green highlight returns to the
histogram mark
.
Press
button again to close the menu.
Note
• If the camera is connected to a computer with
a USB cable, the menu is not displayed.
Disconnect the USB cable from the camera.