![background image](http://html2.mh-extra.com/html/olympus/vr-370/vr-370_instruction-manual_4232591024.webp)
24
EN
Image size
Sets the number of recording pixels.
4608×3456
Suitable for printing pictures over A3 (11×17 in.).
4
3264×2448
Suitable for printing pictures up to A3 (11×17 in.).
n
2560×1920
Suitable for printing pictures up to A3 (11×17 in.).
3
2048×1536
Suitable for printing pictures up to A4 size (8.5×11 in.).
2
1600×1200
Suitable for printing pictures at A5 (5×7 in.).
1
1280×960
Suitable for printing pictures at postcard size.
7
640×480
Suitable for using pictures on emails.
0
1920×1080
Suitable for playing pictures on a TV (widescreen TV) and for printing on A5
(5×7 in.).
●
In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 57)
Registering one touch white balance
Registering one touch white balance
Select [
One Touch 1] or [
One Touch 2], face the camera toward a piece of white paper or other white
object, and press the
button.
●
The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
●
The registered white balance data will not be cleared by turning off the power.
●
Perform this procedure under the light where the pictures will be actually taken.
●
When the camera settings are changed, the white balance must be registered again.
●
When the white balance cannot be registered, check that the white paper
fi
lls the screen, and then
perform the procedure again.
Summary of Contents for VR-370
Page 77: ......
Page 78: ...VM874401...