![background image](http://html1.mh-extra.com/html/olympus/v207090su000/v207090su000_instruction-manual_4308450217.webp)
217
EN
Cautions
7
4
Adjust
fl
ash settings.
• Highlight items using the
FGHI
buttons and rotate the rear dial to choose
settings.
Flash compensation
A Mode
TTL
Manual
Off
+5.0
TTL
+3.0
1/8
–
LO
1
Ch
P
1:02:03
1023
250 F5.6
Group
Flash mode
Optical signal strength
Channel
Flash control mode
Group
Choose a group. Changes to settings apply to all units in
the selected group. Choose
Q
to adjust settings for the unit
mounted on the camera.
Flash control mode
Choose a
fl
ash mode.
Flash compensation
Adjust
fl
ash output. When [Manual] is selected for
fl
ash mode,
you can a value for manual
fl
ash output.
Optical signal
strength
Choose the brightness of the optical control signals emitted by
the
fl
ash units. Choose [HI] if you have placed
fl
ash units at
close to the maximum distance from the camera. This setting
applies to all groups.
Flash mode/
fl
ash level
Choose
#
(standard) or FP (super FP). Choose super FP for
shutter speeds faster than the
fl
ash sync speed. This setting
applies to all groups.
Channel
Choose the channel used for
fl
ash control. Change the
channel if you
fi
nd that other light sources in the area are
interfering with remote
fl
ash control.
5
Set the unit mounted on the camera to [TTL AUTO].
• Flash control settings for the FL-LM3 can only be adjusted using the camera.
Positioning Remote Flash Units
1
Set the wireless RC
fl
ash units to RC mode.
• After turning compatible
fl
ash units on, press the
MODE
button and choose RC
mode.
• Choose a group for each of the compatible
fl
ash units using
fl
ash controls and match
the channel to that selected with the camera.
2
Position the
fl
ash units.
• Position the wireless units with the remote sensors facing the camera.
3
Take pictures after con
fi
rming that the remote units and the unit on the
camera are charged.
Summary of Contents for V207090SU000
Page 256: ......
Page 257: ...WD532700 date of issue 2019 10...