Olympus V207090SU000, Instruction Manual, Page: 111 / 257

111 EN
Shooting
2
Role Function
V
Level Disp
Display the digital level gauge. The exposure bar display in the
view
fi nder functions as a level gauge. Press the control again to exit.
This option takes effect when [Style 1] or [Style 2] is selected for
[EVF Style] (P. 197) in
G Custom Menu a .
u
View
Selection
(display selection)
Switch between view fi nder photography and live view. If [Off] is
selected for [EVF Auto Switch] (P. 173), the display will switch
between the view
fi nder and the monitor. Press and hold the control to
display [EVF Auto Switch] options.
S-OVF (
n
)
Enable [S-OVF] (P. 173). Press once to turn OVF simulation on.
Press again to turn it off.
• This role is available for [
K Button Function] only.
AF Limiter
Enable the AF limiter (P. 163). Press once to enable [AF Limiter].
Press again to disable. Hold the button and rotate the front or rear
dial to choose from three stored settings.
• This role is available for [
K Button Function] only.
Preset MF ( PreMF )
Toggle [ K AF Mode] > [Preset MF] on or off (P. 80). Press the
control once to enable preset MF and again to restore the previous
focus mode. Alternatively, you can choose the [
K AF Mode] by
holding the control and rotating a dial. Focus-mode selection using
custom controls is not available when [mode2] is chosen for [
K
Fn
Lever Function] (P. 164).
Lens Info Settings
(
s
Lens )
Recall previously-saved lens data (P. 196). Recall saved data for the
current lens after changing lenses or the like.
IS Mode
Toggle [Image Stabilizer] on or off (P. 86). Press once to select
[Off] and again to turn image stabilization on. Hold the control and
rotate the front or rear dial to access [Image Stabilizer] options.
Flicker Scan
(
P
)
Adjust settings for [Flicker Scan] (P. 148, 194). Press the control
to select [On]. You can adjust shutter speed for best results while
viewing banding in the display. Press the control again to display
shooting information and access other settings. Press and hold the
control to select [Off] for [Flicker Scann].
Flash Mode (
#
)
Adjust fl ash settings (P. 95). Press once to display fl ash options
and again select the highlighted option and exit. Highlight settings
using the front or rear dial or
HI
on the arrow pad.
• This function can be assigned to the I and G buttons only. You
must fi rst set [
d
Function] to [Direct Function].
• This role is available for [ K Button Function] only.