![background image](http://html1.mh-extra.com/html/olympus/v207090su000/v207090su000_instruction-manual_4308450026.webp)
26
EN
Preparation
1
Turning the camera on
1
Set the
ON/OFF
lever to the
ON
position.
• When the camera is turned on, the monitor will turn on.
• To turn the camera off, return the lever to the
OFF
position.
ON/OFF
lever
Monitor
1:02:03
250 F5.6
ISO-A
200
S-AF
1023
Battery level
Battery icon and battery level are displayed.
j
(green): The camera is ready to shoot.
k
(green): The battery is not full.
l
(green): The battery is low.
m
(blinks red): Charge the battery.
Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend
operation to reduce the drain on the batteries. This is referred to as “sleep mode”.
• When the camera enters sleep mode, the monitor will turn off and operation will be
suspended. Pressing the shutter or
q
button reactivates the camera.
• If no operations are performed for a set period after the camera enters sleep mode, the
camera will turn off automatically. The camera can be reactivated by turning it on again.
• The camera may require additional time to recover from sleep mode when [On] (enabled)
is selected for [Wi-Fi/Bluetooth Settings] > [Power-off Standby].
g
“Wireless Settings
for When the Camera Is Off” (P. 202)
• The delay before the camera goes to sleep or turns off automatically can be selected in
the
G
custom menu. At default settings, the camera will go to sleep after one minute and
turn off automatically after four hours.
g
[Sleep] (P. 174), [Auto Power Off] (P. 174)
Summary of Contents for V207090SU000
Page 256: ......
Page 257: ...WD532700 date of issue 2019 10...