Olympus UWIT-Y0001-RX, Operation Manual

Page: 45 / 62

7.2 Troubleshooting guide
41 UWIT-Y0001-TX, UWIT-Y0001-RX INSTRUCTION MANUAL
Ch.7
The endoscopic image does
not appear on the monitor
while CH1 or CH2 blinks.
The CH of the transmitter and the
receiver is different.
Press the SELECT button of the
transmitter and set to same CH.
Other ID of the receiver remains in
transmitter.
Press the SELECT button to clear the
remained receiver ID. Press the
SELECT button again if the CH of the
transmitter and the receiver is different.
The Wireless Transmitter or Receiver is
used in same frequency range in the
vicinity. (RF interference).
Confirm the CH of the Wireless
Transmitter or Receiver in the vicinity
and set different CH.
The endoscopic image does
not appear on the monitor
while CH1 or CH2 lights on.
The monitor is OFF. Turn the monitor ON.
Different video input terminal is selected
in monitor.
Select appropriate video input terminal
in monitor.
The endoscopic image does
not appear on the monitor
while nothing lights on the
Wireless Transmitter or
Receiver.
The power cord is disconnected. Connect the power cord to AC adaptor
referring to Section 3.5, “Connecting
AC adaptor to an AC mains power
supply”.
The mobile workstation is OFF. Turn the mobile workstation ON.
Nothing lights on or blinks
other than power indicator.
This symptom may be caused by a
malfunction in the circuit of the Wireless
Transmitter or Receiver.
Turn the Wireless Transmitter or
Receiver off, wait 10 seconds or more
and turn on again. If the irregularity
cannot be solved, contact Olympus.
The Wireless Transmitter or
Receiver repeats reboot
automatically.
This symptom may be caused by a
malfunction in the circuit of the Wireless
Transmitter or Receiver.
Turn the Wireless Transmitter or
Receiver off, wait 10 seconds or more
and turn on again. If the irregularity
cannot be solved, contact Olympus.
Irregularity description Possible cause Solution