Olympus UWIT-Y0001-RX, Operation Manual

Page: 27 / 62

3.2 Installation of the equipment
23 UWIT-Y0001-TX, UWIT-Y0001-RX INSTRUCTION MANUAL
Ch.3
CAUTION
• Ensure that the Wireless Transmitter or Receiver is fixed firmly to the high definition
LCD monitor OEV261H. Otherwise, the Wireless Transmitter or Receiver may fall
and cause injury to the operator or damage the Wireless Transmitter or Receiver.
• Use a monitor mount with sufficient load resistance to support the combined weight
of the monitor and the Wireless Transmitter or Receiver. If the monitor with the
Wireless Transmitter or Receiver falls, patient or operator injury and/or equipment
damage may result.
• Do not use screws other than those provided with the Attachment for UWIT.
Otherwise, the Wireless Transmitter or Receiver cannot be fixed firmly to the
Attachment for UWIT and the Wireless Transmitter or Receiver may drop, causing
injury to the operator or damage the Wireless Transmitter or Receiver.
• Do not install the monitor on mobile workstations other than those listed in this
instruction manual. Otherwise, the mobile workstation may tip, injury to the operator
or damage of the monitor/equipment on the mobile workstation may result.
• When installing the Wireless Transmitter and Receiver to the high definition LCD
monitor OEV261H which is on the ceiling arm, ensure that there is no mechanical
interference with other moving part of the ceiling arm/pendant.
• Check if the unit is intended to install by referring to front or rear panel of the
Wireless Transmitter or Receiver before the installation.