Olympus UWIT-Y0001-RX, Operation Manual

Page: 31 / 62

3.6 Connecting video cables to Wireless Transmitter
27 UWIT-Y0001-TX, UWIT-Y0001-RX INSTRUCTION MANUAL
Ch.3
„
Selection of video input terminal
Using SDI IN terminal or DVI IN terminal can be selected for the video input terminal of the Wireless
Transmitter. Appropriate video input terminal must be selected according to the video cables to
connect with devices as referring to “
„
System chart” on page 43. In the video selection status display
to show SDI or DVI, the one lights on or blinks indicates the selected video input terminal. When
selecting the different video input terminal, follow the operation below.
3.6 Connecting video cables to Wireless
Transmitter
1
Confirm that the power indicator light of Wireless Transmitter is on.
If the video input terminal to be used is already selected, skip following operation. Confirm
if the SDI or DVI has a steady light or blinks in the video selection status display on the
front panel of the Wireless Transmitter. If SDI has a steady light or blinks, it means
HD-SDI IN terminal is selected. If DVI has a steady light or blinks, it means DVI IN
terminal is selected.
2
Press and hold SELECT button for about 6 seconds.
While press and hold SELECT button, Channel (CH1 or CH2) will switch in about
1 second, however, continue to hold the SELECT button.
3
Release the finger after confirm that the selection of SDI or DVI is completed in the
video selection status display.
The one selected blinks or lights on and the other unselected lights off.