UES-40
ISSUE4
3-5
Disassembly and Reassembly Procedure
(4) Detach the E23 HARNESS from J7 of
UPHF40SS00U (monitor board).
(5) Remove the 3 NUTS holding the FRONT
PANEL UNIT (C6N3SZ) and detach the
FRONT PANEL UNIT.
Box screwdriver (5.5 mm between opposite sides)
(6) Detach the CABLE from the POWER
SWITCH, and then remove the FRONT
PANEL UNIT.
Note: During reassembly, pay attention to
the following items:
• Fully reinsert the CABLE into the
POWER SWITCH.
• If the binder is removed during disas-
sembly, bind the root of the CABLE
for reassembly.
J7
E23 HARNESS
UPHF40SS00U
(monitor board)
FRONT PANEL UNIT
C6N3SZ
3 NUTS
CABLE
FRONT PANEL UNIT
POWER SWITCH
Green tube, black wire
Blue tube, black wire
Green tube, white wire
Blue tube,
white wire