17
1
Attaching the observation attachment body
Loosen the clamping screw a of the standard arm (BX3-ARM) of the
microscope until the clamping screw is not viewable from above (i.e.
until there is no protrusion when touched with fingers).
1
b
5-2 Side by side observation system for 2 persons and system for 5 persons
2
Insert the circular dovetail b of the observation attachment body
under two protrusions c in the mount on the standard arm of the
microscope.
2
Tighten the clamping screw d of the standard arm to secure the
standard arm firmly.
Attach the observation attachment body so that the clamping
screw d of the standard arm of the microscope and the
clamping screw e of the observation attachment body are
aligned in one line perpendicularly.
3
TIP
a
a
1
c
e
d
Summary of Contents for U-MDOB3
Page 38: ...MEMO...
Page 39: ......
