Olympus Stylus Zoom 80 WIDE DIX Instructions Manual Download

Page: 59 / 70

The LCD display goes off suddenly.

If you don't use the camera, the LCD goes off after

four and half minutes.

Close the lens barrier and open it again or operate

the zoom lever to turn the LCD back on. In addition, the

power is turned off automatically after 4.5 hours. When

the camera is not in use, try to keep the lens barrier

closed.

The shutter doesn't release when the remote control's

button is pressed.

The remote control hasn't been used in the 20

minutes since the Selftimer/Remote Control mode

was engaged, causing the LCD panel to turn off.

Press the zoom lever. The LCD will light. Then

press the Selftimer/Remote button again.

Summary of Contents for Stylus Zoom 80 WIDE DIX







































































Search results

Summary of Contents for Stylus Zoom 80 WIDE DIX

Reviews:

Related manuals for Stylus Zoom 80 WIDE DIX

Brands by name

Popular brands

Olympus Stylus Zoom 80 WIDE DIX, Instructions Manual

Search results

Summary of Contents for Stylus Zoom 80 WIDE DIX

Reviews:

Related manuals for Stylus Zoom 80 WIDE DIX

Brands by name

Popular brands