Olympus Stylus 1, Instructions Manual

Page: 50 / 74

FLASHPHOTO GROUP UNITS
Accessory Shoe 1, 2
The Accessory Shoe 1 is screwed into
the hot shoe socket on the OM Body to
provide direct contact with the clip-on
type electronic flash. This unit also
works as a holder for the Remote
Sensor. The Accessory Shoe 2 is for use
with the OM-2 and Quick Auto 310.
Synchro Cord 0.6m, 5m
Convenient to use with the Quick Auto
310 for direct flash on a cold shoe, or
with the Bounce Grip for off-camera
flash. The Synchro Cord 5m is for
greater off-camera distance than with
the 0.6m.
Remote Sensor
Designed for use with the OM-1, correct
flash exposures can always be made no
matter what bounce angle is, even when
the Bounce Grip is detached from the
OM-1, thus easily permitting auto
bounce flash.
TTL Auto Cord 0.6m
Designed for use with the OM-2, Ac-
cessory Shoe 2 and Quick Auto 310 to
perform off-camera TTL auto flash,
TTL auto bounce flash (with Bounce
Grip), etc.
315V Power Pack
A layer-built battery pack to be hung
from the photographer's shoulder. The
unit generates over 500 flashes at full
power flash with short recycling time
(approx. 1.5 sec.).
F.AC Adapter
Plugged into an AC wall outlet, through
which the AC household current sup-
plies an almost unlimited number of
flashes economically to the Quick Auto
310 and Bounce Grip.
49