* Specifications subject to change without notice.
M.AC Control Box
AC transformer for use with household
current. Incorporates a selector switch
between single-frame operation and
sequential exposure operation, a termi-
nal for the relay cord and a timer for
exposures in intervals from 4 frames per
second to one frame every 120 sec.
M.15V Ni-Cd Charger 1
This unit is necessary to charge the
M.15V
Ni-Cd
Control Pack 1. By
charging for about 4 to 5 hours, the
Control Pack is capable of powering
sequential filming of 40 rolls of 36 ex-
posure films.
250 Film Back 1, 250 Film Magazines
Can be quickly attached to the OM
Body in place of the standard camera
back, and used with the Motor Drive 1
or Winder 1 for roll films up to 250 ex-
posures (10m or 32.8 ft long). Two
Magazines are necessary, one magazine
holds the bulk film and a second maga-
zine is used as a film take-up.
Relay Cords 1.2m and 10m
Extension cords for remote control; one
is 1.2m (3.9ft), the other is 10m
(32.8ft).
250 Film Loader
This unit is used in the darkroom for
loading the 250 Film Magazine from
33m (100ft.) bulk film rolls. A built-in
mechanism automatically stops loading
at preset film lengths.
Compartment Case L
Partitioned Insert
The Compartment Case L is a hard dual-
purpose shoulder or hand-carried case
with two adjustable partitions. Capable
of holding the Motor Drive set by use of
the optional partitioned insert. (p. 70)
M.REMOTE CORDS 1.2m/5m
The M. Remote Cord remote-controls
the Olympus Motor Drive 1 and Winder
1 units equipped with a remote control
jack by a flick of a switch.
42
Summary of Contents for Stylus 1
