Olympus Stylus 1, Instructions Manual

Page: 11 / 74

UNLOADING THE FILM
When the entire roll of film has been
exposed (indicated by numbers 12, 20
or 36 on the exposure counter depend-
ing on film length), rewind the film.
1) Turn the rewind release lever coun-
ter-clockwise until the red line is
opposite the "R".
MAKING DOUBLE EXPOSURES
Should you wish to make more than
one exposure on the same frame:
1) After taking the first exposure, turn
the rewind knob slowly in a clockwise
direction until it stops to take off any
slack in the film.
2) Turn the rewind release lever coun-
ter-clockwise until the red line is
opposite the "R".
2) Fold out the rewind crank and
wind it in the direction of the arrow.
During the rewind procedure you will
feel tension on the crank. When it
turns free the film has been completely
rewound back into the cartridge.
3) Hold both the rewind knob and
rewind release lever firmly to prevent
them from turning and advance the
film advance lever. The shutter will
then be cocked for the next exposure
of the frame, without the film being
advanced.
4) Depress the shutter release button
with a slow, steady pressure.
5) After completing the multiple ex-
3) Open the camera back by pulling up
on the rewind crank and remove the
film cartridge. Keep camera and film
out of direct sunlight.
IMPORTANT: Do not force the film
advance lever if the film has been fully
exposed. If there is some resistance,
rewind the film to prevent tearing.
posure, cover the lens with a lens cap,
advance the film and shoot a blank
frame to avoid overlapping.
You can make as many multiple ex-
posures as you like by repeating the
above procedure. With each exposure
on the same frame (the exposure
counter adds one), the likelihood of
slippage is increased. Practice is re-
quired in order to obtain good results.
10