Olympus Sonic 1200S/HR, User Manual

Page: 32 / 154

24 Chapter 2
Accuracy: ±1%.
Velocity : 0.0250 to 0.6000 in/µs (635 to 15240 m/s).
Repetition Rate : 3450Hz maximum limited by range and pulse width settings.
• Control: Selectable in 50Hz steps.
• Accuracy: ± 0.05%.
Horiz. Linearity: ± 1% of full screen.
Thickness:
Range : 0.010" (0.005 HR)-296" (or maximum display range, whichever is smaller).
Resolution: 0.010 (0.0005 HR) inch when display range is <1.00 inch; 0.5% of display range
when display range is
equal to or greater than
1.00 inch
Distance Output
• Amplitude: Scalable. 1000mV to 4000mV.
• Accuracy: Greater of 30mV or 2% of display indication with a 1000 ohm load.
Modes: Selectable. Start-to-echo, echo-to-echo, autocal start-to-echo, autocal echo-to-echo.
Freeze: Thickness measurements on freeze display mode.
Trig Functions Angle beam calculations are performed and displayed, correction for curved
surfaces.
Display: Soundpath, surface distance, and depth from the surface.
Angle: 0° - 90° in 0.1° increments.
Diameter: 0.250" - 100", flat (OFF).
RF Thickness: Thickness measurements in RF display mode.
Alarm Output: 3.3 v logic signals. (0 = no alarms; 2 v = alarm condition)