Shooting
2
28
EN
Switching the information display
You can switch the information displayed in
the monitor during shooting using the
INFO
button.
INFO
button
INFO
INFO
Level Gauge display
(Custom2)
250
250 F5.6
P
S-IS ON
S-IS ON
ISO-A
200
1023
1:02:03
0.0
INFO
INFO
Image Only
Histogram display
(Custom1)
Basic Information*
250
250 F5.6
P
S-IS ON
S-IS ON
ISO-A
200
1023
1:02:03
0.0
250
250 F5.6
P
S-IS ON
S-IS ON
ISO-A
200
1023
1:02:03
0.0
L
F
4K
30p
INFO
INFO
INFO
INFO
* Not displayed in
n
mode (movie mode) unless recording is in progress.
• You can change Custom1 and Custom2 settings.
g
[
G
/Info Settings] > [LV-Info]
• The information display screens can be switched in either direction by rotating the front
dial while pressing the
INFO
button.
Histogram display
A histogram showing the distribution of brightness
in the image is displayed. The horizontal axis
gives the brightness, the vertical axis the number
of pixels of each brightness in the image. During
shooting, overexposure is indicated in red,
underexposure in blue, and the range metered
using spot metering in green.
More
Less
Dark
Bright
Level gauge display
The orientation of the camera is indicated. The “tilt” direction is indicated on the vertical bar
and the “horizon” direction on the horizontal bar. The camera is level and plumb when the
bars turn green.
• Use the indicators on the level gauge as a guide.
• Error in the display can be corrected via calibration (P. 150).
