MX61/MX61L
30
The following table shows the commands used with the MX61/61L.
The commands and responses of the MX61/61L employ ASCII characters. Line feed code <CR><LF> is required after any
command is added after any response.
*
1)
The detailed description on each command will be given on subsequent pages.
5
Command List
Command
Type
*
3)
Description
Response (when successful)
1LOG IN
*
2)
Request
Local remote mode switching.
1LOG +
1LOG OUT
Request
Remote local mode switching.
1LOG +
1LOG?
Query
Check of the current local/remote mode.
1LOG IN or 1LOG OUT
1OB n
(n: 1 to 6)
Request
Rotation of the revolving nosepiece position
to the number specified with “n” in the optical
path.
1OB +
1OB?
Query
Check of the current revolving nosepiece posi-
tion (objective) number.
1OB n
(n: 1 to 6)
1EAS n
(n: 0 to 3113)
Request
Setting of the aperture iris diaphragm to the po-
sition with the number specified with “n”.
(n: 0 = Minimum. 1550 = Intermediate. 3113 =
Maximum.)
1EAS +
1EAS?
Query
Check of the current aperture iris diaphragm
position.
1EAS n
(n: 0 to 3113)
1OBA n
Request
Rotation of the revolving nosepiece position
(objective) with the number specified with “n”
in the optical axis, plus setting of the aperture
iris diaphragm to the position specified with
the AS PRESET switch.
1OBA +
1CUBE?
Query
Check of the current observation method.
1OBA n
(n: 1 = Brightfield or optional
2 = Darkfield)
1UNIT?
Query
Check of the presence of any unit connected to
the MX61/61L.
1UNIT MX2, RVn or HS
(n: 2 or 3)
1FPV ON
Request
Setting the anti-glare setting.
1FPV +
1FPV OFF
Request
Cancellation of the anti-glare setting.
1FPV +
1FPV?
Query
Check of the current darkfield glare prevention
setting status.
1FPV ON or 1FPV OFF
*
1)
Line feed command <CR><LF> consists of ASCII codes 0x0D and 0x0A.
*
2)
“ ” represents a space.
*
3)
Command types
Request: Command sent by the host to the MX61/61L for requesting an operation or setting.
Query:
Command sent by the host to the MX61/61L for inquiring its status.
