11
ASSEMBLY
2-1 Assembly Diagram
}The diagram below shows where the various modules should be
mounted. Study the assembly instructions for only the modules to be
employed.
# When assembling the equipment, make sure that all parts are free
of dust and dirt and avoid scratching any parts or touching glass
surfaces.
Eyepieces
SWH Series
WHN Series
Motorized revolving
nosepiece
U-D5BDREMC
U-D6REMC
U-P5REMC
DIC slider
U-DICR
U-DICRH
U-DICRHC
Breath shield
MX-BSH
MX-BSH-ESD
Brightfield
objective
adapter
BD-M-AD
Brightfield
objective
Brightfield/
darkfield
objective
Holders
(See pages 9 and 10.)
Stage
MX61L
MX-SIC1412R2
MX61
MX-SIC8R
MX-SIC6R2
MX-SIC6A
TV system
Photomicrographic
system
Observation tube
MX61L
MX-SWETTR
MX61
MX-SWETTR
U-SWTR-3
U-TR30-2
U-BI30-2
Intermediate attachment
(Only one of the following
can be attached.)
U-EPA2
U-CA/ECA
MX-AFSU
U-CFU
Allen screwdriver (3 mm)
Allen wrench (3 mm)
Tool holder
Tools Used
(Provided with the microscope frame)
Halogen bulb
12V100WHAL-L
12V100WHAL
100 W halogen
lamp housing
U-LH100-3
U-LH100L-3
High-intensity
lamp housing
U-LH75XEAPO
U-LH100HG
U-LH100HGAPO
Adapter
MX-HGAD
Power cord
Note 2)
AF connector
Light source
LG-PS2
Light guide
LG-SF
Polarizer
U-PO3
Microscope frame
MX-61L-F
MX61-F
(Transmitted light
module)
MX-TILLA
MX-TILLB
Analyzer
U-AN360-3
Hand switch
Note 1)
U-HSTR2
Filters
U-25ND6-2
U-25ND25-2
U-25LBD
U-25IF550, etc.
Note 1) Exclusive connector for the U-HSTR2 hand switch. To prevent mal-
function, do not connect other modules.
Note 2) Exclusive connector for the MX-AFCB control box for use with an
Olympus active AF unit. To prevent malfunction, do not connect
other modules.
}The tools used can be stored in the holes on the tool holder provided
with the microscope frame. Use the double-sided adhesive tape of the
tool holder to attach it to a position that does not hinder operation.
!
Do not attach the tool holder anywhere near the bottom of the lamp
housing since it generates high-temperature heat.