![background image](http://html1.mh-extra.com/html/olympus/mju-1050-sw/mju-1050-sw_instruction-manual_734654048.webp)
EN
Operating the camera by tapping the body [TAP CONTROL]
x
SETUP
TAP CONTROL
Submenu 2
Application
OFF
Cancels [TAP CONTROL]
ON
[TAP CONTROL] is activated.
CALIBRATE
Adjusts the tap strength and intervals between multiple taps on each side of the camera
body. (top, left, right, & back)
Functions available when [TAP CONTROL] is set to [ON]
Camera’s top [TOP]: Tap twice
Confirms the selected menu.
Switches [TAP CONTROL] to [ON] or [OFF].
(p. 4)
●
●
Camera’s right side [RIGHT]: Tap once
Sets the flash mode.
(p. 21)
Camera’s back [BACK]: Tap once
Switches to playback mode.
(p. 49)
Camera’s left side [LEFT]:
Tap once
Sets [SHADOW ADJ.].
(p. 20)
Operating during shooting mode (Example: Flash mode)
1
Tap the right side of the camera body once.
P
OK
OK
AUTO
SET
FLASH AUTO
AUTO
!
#
$
//
When tapping the camera’s top
The flash mode selection screen is displayed.
2
Tap the right or left side of the camera body to select a
function.
3
Tap the top of the camera body twice to confirm your
selection.
Tap the camera firmly using the pad of your finger.
When the camera is stabilized on a tripod for example, tap control
may not work properly.
To prevent dropping the camera when using tap control, strap the
camera to your wrist.
●
Summary of Contents for Mju 1050 SW
Page 80: ...VS699101...