![background image](http://html1.mh-extra.com/html/olympus/mju-1050-sw/mju-1050-sw_instruction-manual_734654021.webp)
1
EN
2
Use
34
to select [ON], and press
the
o
button to set.
3
Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
For some subjects, the frame may not
appear or may take some time to appear.
When set to [ON],
[ESP/
n
] (p. 30)
is
automatically fixed to [ESP], and
[AF
MODE] (p. 31)
is automatically fixed to
[FACE DETECT].
Using the flash
The flash functions can be selected to best
match the shooting conditions and render the
desired image.
1
Press the
#
button.
You can operate the camera by tapping the
body when [TAP CONTROL] is [ON].
[TAP CONTROL] (p. 48)
P
OK
OK
AUTO
SET
FLASH AUTO
AUTO
!
#
$
2
Use
34
to select the setting option,
and press the
o
button to set.
Item
Description
FLASH AUTO
The flash fires automatically in
low-light or backlight conditions.
REDEYE
This emits pre-flashes to reduce
the occurrence of red eye in your
photos.
FILL IN
The flash fires regardless of the
available light.
FLASH OFF
The flash does not fire.
Adjusting the brightness
(Exposure compensation)
The standard brightness (appropriate exposure)
can be adjusted brighter or darker to obtain the
desired shot.
1
Press the
F
button.
0.0
+0.3
+0.7
+1.0
EXPOSURE COMP.
Exposure compensation value
2
Use
1234
to select the desired
brightness image, and press the
o
button.
Summary of Contents for Mju 1050 SW
Page 80: ...VS699101...