![background image](http://html1.mh-extra.com/html/olympus/mju-1050-sw/mju-1050-sw_instruction-manual_734654023.webp)
EN
Using the LED illuminator
In a dark location, the LED illuminator can
be used as an auxiliary light to see things or
compose shots.
1
Set [LED ILLUMINATOR] (p. 47) to
[ON].
2
Press and hold the
Y
button down
until the LED illuminator lights up.
If you perform an operation when the LED
illuminator is on, it will illuminate up to approx. 90
seconds.
LED illuminator
The LED illuminator turns off if no operation
is performed for approx. 30 seconds.
Even when the camera’s power is turned
off, if the lens barrier is opened, the LED
illuminator lights for 30 seconds.
To turn the LED illuminator off
Press and hold the
Y
button down, until the
LED illuminator turns off.
●
Changing the shooting
information display
The display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
1
Press the
g
button.
The displayed shooting information changes in
the order shown below each time the button is
pressed.
“Shooting mode display” (p. 8)
10
M
+2.0
P
4
IN
ISO
1600
N
ORM
10
M
+2.0
P
4
IN
ISO
1600
N
ORM
10
M
+2.0
P
4
IN
ISO
1600
N
ORM
Normal
No information
Histogram
Grid
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
appear mostly black.
The green section shows
the luminance distribution in the
center area of the monitor.
●
Summary of Contents for Mju 1050 SW
Page 80: ...VS699101...