Olympus MAJ-2306, Instructions Manual, Page: 20 / 80

16
3.3 Attaching the NBI emblem
MAJ-2306 INSTRUCTION MANUAL
Ch.3
NOTE
Make sure not to lose the provided Allen screwdriver (3 mm width across flats). It
will be required when detaching the NBI unit from the LED light source for
servicing, etc.
NOTE
The NBI emblem is designed to be attached to the LED light source to which the
NBI unit is connected in order to give reference information that the NBI function is
incorporated. Although the equipment functions normally without the NBI emblem,
it is recommended to attach it to the equipment connected to the NBI unit in order
to facilitate distinction of the incorporated function.
3.3 Attaching the NBI emblem
1
Peel off the protective sheet from the back side
of the emblem.
Figure 3.5
2
Attach the emblem onto the emblem attaching
section of the LED light source.
Figure 3.6
Protective
sheet
Emblem
Emblem
LED light source
Emblem attaching
section