8
Tr
oubleshooting
92
EN
Troubleshooting
Symptom
Probable cause
Action
Recording level too high
The recording level has not been adjusted.
Adjust the recording level and then try
recording once more (
☞
P.31).
This could potentially be because the
recording level and output level for
connected external devices is too high.
If you cannot record clearly even
after adjusting the recording level,
then adjust the output level for the
connected devices (
☞
P.31).
Voice files are not recorded in stereo
The connected external microphone is
monaural.
When an external monaural microphone
is connected for recording audio, audio is
recorded to the L channel only.
[
Rec Format
] is set to a monaural recording
mode.
Set [
Rec Format
] to the stereo
recording mode (
☞
P.66).
Cannot find the recorded Voice File
Wrong folder.
Switch to the correct folder
(
☞
P.25).
Noise heard during playback
The recorder was shaken during recording.
———
The recorder was placed near a cell phone
or fluorescent lamp while recording or
during playback.
Move the recorder.
The settings of the connected external
microphone do not correspond to those of
the recorder.
When a microphone that does not need
to be supported by the plug-in power
function is connected, turn the
[
Plug-in Power
] setting to [
Off
] (
☞
P.67).
Unable to hear any sound from the
earphone through the recording
monitor
[
Rec Monitor
] is set to [
Off
].
Set
[
Rec Monitor
] to [
On
] (
☞
P.68).
Unable to erase the file
The file is locked.
Unlock the file (
☞
P.51).
The file is read-only.
Unlock the file or cancel the file’s read-only
setting on the PC.
