5
M
enu setting method
68
EN
Menu setting method
▌
How to enable pre-recording
To enable pre-recording, set [
Pre-Recording
] to [
On
].
1
While the recorder is in stop
mode, press the REC (
s
) button.
•
The recorder enters recording pause mode.
However, it constantly records ambient
sound and holds up to 2 seconds of data,
which is refreshed every second.
2
Press the REC (
s
) button.
•
The recorded data will include up to 2
seconds of sound recorded before
the
REC
(
s
) button was pressed.
• When the [
Pre-Recording
] function is used, the
following functions cannot be used.
•
[
OVER DUB
] (
☞
P.35)
Pre-Recording
Pre-recording enables you to record up to 2 seconds * of sound
before you actually press the recording button. This function
allows you, for example, to start recording birdsong up to 2
seconds * before the bird starts singing even if you press the
recording button at the moment the bird starts singing .
[
On
]: For recording sound up to 2 seconds * before the
recording button is pressed.
[
Off
]: For normal recording start.
*
Recording start time will vary according to
[
Rec Format
] settings.
• To confirm the setting, press and hold the
F3
(
INFO
)
button at the [
Home
] screen (
☞
P.23).
Smart Time
Set the automatic adjustment time to be used in
[
SMART
] mode.
[
10 sec.
] [
30 sec.
] [
1 min.
]: Set the time for automatic
adjustment.
[
Endless
]: Automatic adjustment will continue until
you skip it.
Metronome
The metronome is a useful rhythm guide and can
be used during recording. You can also set it while
recording is paused. The metronome sound is not
output from the speaker.
1
Select the metronome options.
[
Tempo
]: Set the metronome’s tempo.
[
Sound
]: Set the metronome’s sound.
[
Beat
]: Set the metronome’s pattern.
[
Volume
]: Set the metronome’s volume.
Rec Monitor
Select whether or not to output audio while recording
from the earphone jack (EAR).
[
On
]: Enables the recording monitor function. Sound
will be output from the
EAR
jack.
[
Off
]: Disables this function. Sound will not be output
from the
EAR
jack.
• If the external speaker is connected while recording,
there is a risk that audio feedback will occur. It is
recommended that you use earphones to monitor
recording, or turn [
Rec Monitor
] to [
Off
] while
recording.
A
This function is enabled when the Mode dial is
switched to [
MANUAL
].
