4 Installation
17
The software and the camera driver have now been installed on your PC.
4.3
Step 3: Connect the camera
You can connect the camera to the microscope and computer as soon as you've
installed the software. Do the following:
1)
Remove the camera's protective cap.
2)
Mount the camera onto the microscope's camera adapter.
3)
Plug the end of the USB cable with the type B plug into the camera socket.
Make sure that you only use the USB cable that is delivered with your camera.
The proper functioning of the camera can only be guaranteed when this cable
is used.
4)
Plug the end of the USB cable with the type A plug into a slot of the USB 3.0
PCI express card inserted with step 1.
Camera
adapter
OLYMPUS
Monitor
PC
Microscope
LC30
Make sure that the plug is the right way round
The USB plugs are not symmetrical. Make sure that the plugs are the right way
round when you plug them into the ports.
ATTENTION
