![background image](http://html2.mh-extra.com/html/olympus/lc30/lc30_instruction-manual_4287296015.webp)
4 Installation
15
4
Installation
Follow the order below when installing the camera and software.
1)
Insert USB 3.0 PCI express card This card can also be used for USB 2.0
cameras.
2)
Install the software
3)
Connect the camera
4.1
Step 1: Insert USB 3.0 PCI express card
The camera is connected to the computer via a USB 3.0 PCI express card. Even if
your computer already has a USB 3.0 PCI express card, we strongly recommend
inserting the supplied PCI express card. When you do so, it ensures the camera's
full functionality and avoids any traffic bottlenecks.
When inserting the PCI express card, please follow the instructions given by the
manufacturer. Also pay attention to the safety instructions given below:
After you have inserted the card, make sure to note the following point.
This step is only necessary when a USB PCI express card is included in the scope
of supply (Item name: CAM-LC30 (E9700777)).
Danger of electric shock from a plugged-in computer!
When installing hardware on a PC, there is a risk of electric shock.
Be sure to disconnect the power supply before you open the PC!
Injuries caused by sharp metal edges!
The metal edges of the computer and the PCI express card are sharp. You can
injure yourself on them.
Therefore, take care when you open the computer and install the PCI express
card. It's a good idea to wear thin gloves when you do so.
WARNING
WARNING
Use the supplied power supply cable
Use the power supply cable supplied with the USB 3.0 PCI express card.
ATTENTION