background image

25

Safety precautions   

En

z

Do not use the flash on people (infants, small children, etc.) at close 
range. 

When you fire the flash, you must be at least 1 m (3 ft) away from the faces 
of your subjects. Firing the flash too close to the subject’s eyes could cause 
a momentary loss of vision. 

z

Keep young children and infants away from the camera. 

If not, the following dangerous situations may occur: 

Becoming entangled in the camera strap or power cords, causing strangulation. If 
this happens, follow the doctor’s instructions. 

Accidentally swallowing the battery or other small parts.

Accidentally firing the flash into their own eyes or those of another child. 

Accidentally being injured by the moving parts of the camera. 

z

Do not use or store the camera in dusty or humid places. 

Using or storing the camera in dusty or humid places may result in a fire or 
electric shock. 

z

Do not cover the flash with a hand while firing. 

Do not cover the flash or touch it after it has just been fired sequentially. It 
may be hot and cause minor burns. 

z

Do not take apart or modify the camera. 

Never attempt to disassemble the camera. The internal circuits contain high 
voltage points which could cause serious burns or electrical shock. 

z

Do not let water or foreign objects inside the camera. 

A fire or electric shock may result. If the camera is accidentally dropped in 
water, or if liquid is spilled into the camera, stop using it, allow it to dry, and 
then remove the battery. Contact the nearest authorized Olympus service 
center. 

z

Do not touch the battery or the battery charger while battery charging 
is in progress. 

Wait until charging is complete and the battery has cooled. 
The battery and battery charger become hot while charging. At these times, 
they may cause minor burns. 

z

Do not use a non-specified battery and/or charger. 

Use of a non-designated battery and/or re-charger may lead to camera or 
battery failure as well as other unexpected accidents. Any accidents 
resulting from use of non-designated equipment will not be compensated. 

 

CAUTION

z

Stop using the camera immediately if you notice any unusual odors, 
noise, or smoke around it. 

If you notice any unusual odors, noise, or smoke around the camera during 
operation, switch it off immediately — and remove the battery. Allow the 
camera to sit idle for a few minutes to cool. Take the camera outdoors, away 
from flammable objects, and carefully remove the battery. Never remove the 
battery with bare hands. Contact the nearest Olympus service center 
immediately.

s003_En-Fr-Es-De.book  Page 25  Tuesday, December 27, 2005  4:34 PM

Summary of Contents for EVOLT E-330






























Reviews: