![background image](http://html1.mh-extra.com/html/olympus/e-pl7/e-pl7_instruction-manual_4251760031.webp)
31
EN
Basic operations
4
y
Flash intensity control .....................P. 68
z
ISO sensitivity .................................P. 70
A
AF mode .........................................P. 69
B
Metering mode ................................P. 68
C
Flash mode .....................................P. 65
D
Battery check
;
Lit up (green): Ready for use.
(Displayed for
about ten seconds
after the camera is
turned on.)
:
Lit up (green): Battery is running
low.
]
Blinks (red):
Charging required.
E
Live guide recall ..............................P. 24
Switching the information display
You can switch the information displayed in the monitor during shooting using the
INFO
button.
INFO
Level gauge display
INFO
INFO
250
250 F5.6
P
0.0
0.0
INFO
Image only
Histogram display
Information display on
01:02:03
01:02:03
38
38
250
250 F5.6 0.0
0.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
FullHD
F
Wi-Fi
01:02:03
01:02:03
38
38
250
250 F5.6
P
0.0
0.0
L
N
S-IS AUTO
S-IS AUTO
FullHD
FullHD
ISO-A
200
Wi-Fi
Histogram display
Display a histogram showing the distribution of brightness
in the image. The horizontal axis gives the brightness,
the vertical axis the number of pixels of each brightness
in the image. Areas above the upper limit at shooting are
displayed in red, those below the lower limit in blue, and
the area metered using spot metering in green.
Level gauge display
Indicate the orientation of the camera. The “tilt” direction is indicated on the vertical bar and
the “horizon” direction on the horizontal bar. Use the indicators on the level gauge as a guide.
More
Less
Dark
Bright