![background image](http://html1.mh-extra.com/html/olympus/e-m5mark-ii/e-m5mark-ii_instruction-manual_4249020029.webp)
29
EN
Shooting
2
• [3D Photo] is subject to the following limitations.
[3D Photo] can be used only with a 3D lens.
The camera monitor cannot be used to playback images in 3D. Use a device that
supports 3D display.
Focus is locked. In addition,
fl
ash and self-timer also cannot be used.
Image size is
fi
xed at 1824 × 1024.
RAW photography is not available.
Frame coverage is not 100%.
• In [Panning], camera movement is detected and the optimal shutter speed is controlled
when moving the camera to track a moving subject. It is convenient for shooting moving
subjects as if the background is
fl
owing.
In [Panning],
J
is displayed during panning detection, and
I
is displayed when
nothing is detected.
When using a lens with an image stabilizer switch in [Panning], turn the image stabilizer
switch off.
Suf
fi
cient panning effects may not be obtained in bright conditions. Use a commercially
available ND
fi
lter to obtain effects more easily.
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama.
g
“Connecting the camera to a computer” (P. 124)
1
Select [Panorama] in
SCN
and press
Q
.
2
Use
FGHI
to choose a pan direction.
3
Take a picture, using the guides to frame the shot.
• Focus, exposure, and other settings are
fi
xed at the
values for the
fi
rst shot.
250
250 F5.6
38
M
4
Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
[ 2 ]
250
250 F5.6
38
M
[ 3 ]
Exit
Exit
• A panorama may include up to 10 images. A warning indicator (
g
) is displayed after
the tenth shot.
5
After taking the last shot, press
Q
to end the series.
Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$
Notes
•
Pressing
Q
before shooting the
fi
rst frame returns to the scene mode selection menu.
Pressing
Q
in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.