![background image](http://html1.mh-extra.com/html/olympus/e-m5mark-ii/e-m5mark-ii_instruction-manual_4249020143.webp)
143
EN
Using separately sold accessories
9
Other external
fl
ash units
Use after connecting the synchro cord to the hot shoe
or external
fl
ash jack. When not using an external
fl
ash
terminal, be sure to attach the cap.
When attaching a third-party
fl
ash to the camera’s hot shoe
or external
fl
ash jack, be careful of the following points.
Cap
• Using obsolete
fl
ash units that apply currents of more than about 250 V to the X-contact
will damage the camera.
• Connecting
fl
ash units with signal contacts that do not conform to Olympus speci
fi
cations
may damage the camera.
• Set the Shooting mode to
M
, set the shutter speed to a value no higher than
fl
ash
synchronous speed, and set ISO sensitivity to a setting other than [AUTO].
• Flash control can only be performed by manually setting the
fl
ash to the ISO sensitivity
and aperture values selected with the camera. Flash brightness can be adjusted by
adjusting either ISO sensitivity or aperture.
• Use a
fl
ash with an angle of illumination suited to the lens. Angle of illumination is usually
expressed using 35-mm format equivalent focal lengths.
Principal Accessories
Four Thirds lens adapter (MMF–2/MMF–3)
The camera requires a Four Thirds lens adapter to attach Four Thirds lenses. Some
features, such as autofocus, may not be available.
Remote cable (RM–UC1)
Use when the slightest camera movement can result in blurred pictures, for example
for macro or bulb photography. The remote cable attaches via the camera multi-
connector. (P. 10)
Converter lenses
Converter lenses attach to the camera lens for quick and easy
fi
sh-eye or macro
photography. See the OLYMPUS website for information on the lenses that can be
used.
• Use the appropriate lens attachment for
SCN
mode (
f
,
w
, or
m
).
Eyecup (EP-16)
You can exchange this for a larger eyecup.
Removing