![background image](http://html1.mh-extra.com/html/olympus/e-m1x/e-m1x_instruction-manual_4285195352.webp)
n
3-7 Focus
Choosing a Focus Target
(AF Target Point)
When an option other than [All Targets] is selected for AF target mode, you can
position the target or targets over the subject on which you wish to focus. At default
settings, the multi selector is used to position the AF target. The target can be
moved while fi lming is in progress.
• This setting can be accessed via:
- The multi selector
- The LV super control panel (P. 353)
Access via the Multi Selector
1
Use the multi selector to position the AF target.
Multi selector
• The AF target is displayed in green at the start of the
operation.
• If the AF target is moved during recording, only the
moving target will be displayed.
• To select the center AF target, press the multi selector or
press and hold the
OK
button.
123
min
1
AF target
2
Take pictures.
• AF target mode options clear from the display when the
shutter button is pressed halfway.
• The AF frame is displayed in place of the selected AF
target.
• Assigning
N
(AF-target selection) to the arrow pad or
Fn
button allows the arrow pad to be
used for AF-target selection. Press the
FGHI
buttons to view the AF target display and
use the rear dial to choose a target.
N
(AF-target selection) is assigned to the arrow pad
by default.
• If you assign [
N
] to a control using [
n
Button Function] (P. 417), you can press the
control and then position the AF target using the multi selector or arrow pad. This option is
assigned to the
Fn
button by default.
352 EN
3
Summary of Contents for E-M1X
