Olympus E-M1X, Instruction Manual

Page: 106 / 683

K
2-8 Choosing a Shooting Mode
• During live time photography, you can refresh the preview by pressing the shutter button
halfway.
• Some limitations apply to the choice of ISO sensitivity settings available.
• Bulb photography is used in place of live bulb photography when multiple exposure,
keystone compensation, or fi sheye correction is in effect.
• Time photography is used in place of live time photography when multiple exposure,
keystone compensation, or fi sheye correction is in effect.
• Limitations apply to some features during shooting, including:
sequential shooting, the self-timer, interval timer photography, AE and fl ash bracketing,
and multiple exposure; limitations also apply during live bulb and live time photography.
• [
K
Image Stabilizer] (P. 176) turns off automatically.
• Depending on camera settings, the temperature, and the situation, you may notice noise
or bright spots in the monitor. These may sometimes appear in pictures even when [Noise
Reduct.] (P. 533) is enabled.
%
• Display brightness can be adjusted during bulb/time photography. At default settings, the
display is darker than normal.
g
[Bulb/Time Monitor] (P. 534)
• During bulb/time photography, the brightness of the subject in the display is enhanced for
ease of viewing when lighting is poor. Settings can be adjusted, for example to prioritize
image quality or the display rate.
g
[Live View Boost] (P. 200)
$
Noise
The longer the exposure, the greater the number of image artifacts (“noise”) that appears in the
display. The increasing temperature of the image sensor and its internal circuitry turns them into
heat sources that generate currents in areas of the sensor not otherwise exposed to light. This
phenomenon becomes more noticeable if you increase ISO sensitivity or exposure times when
shooting at high ambient temperatures. The camera’s long-exposure noise reduction helps
reduce this type of noise.
g
[Noise Reduct.] (P. 533)
106 EN
2