EN
79
Customizing the settings/f
unctions of your camera
5
Auto pop up
The built-in flash pops up automatically in low light or backlight conditions while in the
AUTO
or scene mode.
This allows you to stop the built-in flash from popping up automatically.
MENU
[
Y
]
[AUTO POP UP]
[ON]
: The built-in flash pops up automatically.
[OFF]
: The built-in flash will not pop up automatically.
;
FUNCTION
This lets you assign a function to the
<
button.
MENU
[
Y
]
[
;
FUNCTION]
[OFF]
Does not allow function allocation.
[
V
]
Press the
<
button to acquire the WB value.
g
“Setting the one-touch white balance” (P. 60)
[TEST PICTURE]
Pressing the shutter button while pressing the
<
button enables you to check the
picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.
[MY MODE]
While holding down the
<
button, you can take pictures using the camera settings
registered in the
[MY MODE SETUP]
.
g
“My Mode setting” (P. 80)
[PREVIEW]/[LIVE PREVIEW] (electronic)
While holding down the
<
button, you can use the preview function.
g
“Preview function” (P. 35)
Live view boost
During live view shooting, you can brighten the monitor for easier confirmation on the subject.
MENU
[
Y
]
[LIVE VIEW BOOST]
[OFF]
The subject is displayed on the monitor with the brightness level that is adjusted
according to the exposure being set. You can shoot while confirming through the
monitor in advance to get a picture that is to your liking.
[ON]
The camera automatically adjusts the brightness level and displays the subject on the
monitor for easier confirmation. The effect of the exposure compensation adjustments
will not be reflected on the monitor.
Customizing the control dial’s function
You can set the control dial’s operation to settings the opposite from the factory default
setting. The control dial can be used to operate the exposure compensation setting instead of
the program shift setting in
P
mode, and the aperture value setting instead of the shutter
speed setting in
M
mode.
MENU
[
Y
]
[DIAL]
[
P
]/[
M
]
If you select [
P
]:
P
mode
Setting
Set using the control dial
Set using the control dial while
pressing the
F
button
%
(factory default setting)
Program shift (
%
)
Exposure compensation
F
Exposure compensation
Program shift (
%
)
s0010_e_00_unified.book Page 79 Monday, April 9, 2007 6:12 PM
Summary of Contents for E-519
Page 139: ...EN 139 Memo...
Page 140: ...Printed in China VH964202...
