EN
19
Mastering the E-510
1
How to make function settings
There are three basic ways to make function settings with this camera.
• Setting while looking at the control panel screen (See below)
• Setting using direct buttons (
g
P. 20)
• Setting on the menu (
g
P. 21)
Setting functions using the control panel screen
Select an item on the control panel screen and
change the setting.
1
When the power switch is set to ON,
the control panel screen (shooting
information and setting screen) is
displayed on the LCD monitor.
• The display changes each time the
INFO
button is pressed.
• You can also display the control panel screen
by pressing the
i
button and change the
setting when using live view.
2
Press the
i
button.
• The cursor (function being selected) on the control panel screen lights (
1
).
3
Use
p
to move the cursor to the function you want to set (
2
).
4
Turn the control dial to change the setting.
• Pressing the
i
button while the item is being selected displays the direct menu for that
function. You can also use the direct menu to change the setting (
3
). After changing the
setting, press the
i
button to confirm your setting. Or if you do not operate the control dial
within a few seconds, your setting will be confirmed and the control panel screen will be
restored.
g
“Button timer” (P. 84)
How to set the functions
Power switch
Control dial
i
button
p
Arrow pad
INFO
button
2007.08.16
2007.08.16
Control panel screen
Basic
Display off
Detailed
Cursor
Direct menu
e.g.) When setting Sequential/Self-timer/Remote control shooting
1
2
3
s0010_e_00_unified.book Page 19 Tuesday, April 10, 2007 5:22 PM
Summary of Contents for E-519
Page 139: ...EN 139 Memo...
Page 140: ...Printed in China VH964202...