40
Reset
If the display or the recorder acts strangely,
lightly press the reset button in the battery
compartment with the tip of a ballpoint pen or
a similar object.
Notes
• Do not use a sharp object such as a needle.
• The time/date setup process launches
automatically when you press the reset button. Set
the time and date again (
☞
P.14).
• Audio data is not erased when the recorder is reset.
Setting the HOLD switch to the
HOLD position.
If you set the recorder to HOLD status by
sliding the HOLD switch in the direction of the
arrow, the current conditions will be preserved,
and all buttons and switches except the HOLD
switch will be disabled. This feature is useful
when the recorder has to be carried in a bag
or pocket.
Remember to reset the HOLD switch when
using the recorder.
Notes
• If you set the recorder to hold during Stop mode,
the display goes dark. If you press any button, the
time will flash for about 2 seconds, but the function
of the button is disabled.
• The alarm will sound at the scheduled time even if
the recorder is set to hold. The recorder begins to
play the file associated with the alarm when you
press any button.
• If you are recording when you switch the recorder
to HOLD, recording will continue until the recorder
memory runs out.
Hold
MEN
U
INDEX
REC
STOP
ERA
SE
HOLD
Hold/Reset
Summary of Contents for DS-2000
Page 46: ......
