background image

21

Recording/Microphone Sensitivity

Pause Insert Recording

Pause

Press the PLAY button.

➥ 

“INSERT PAUSE” flashes on the display.

Resume Insert Recording

Press the PLAY button again.

➥ 

Insert recording resumes.

Notes

• The recording time and date of the file into which

recording has been inserted is updated to the time
and date of when the inserted  recording was
recorded.

• You cannot select any recording mode other than

that of the original file before insert recording
(

 P.22).

Microphone
Sensitivity

Microphone sensitivity is adjustable to meet
recording needs.

Using the MICSENS switch, choose
between the CONF and DICT positions.

CONF : High-sensitivity mode that records

sounds in all directions.

DICT : Low-sensitivity mode suited for

dictation.

.....................................................................

Notes

• If you want to clearly record dictation, switch to

DICT mode and place the internal microphone
close (5 to 10 cm) to the speaker.

• If the ambient (background) noise is too loud to

get a clear recording even in DICT mode, we
recommend that you use an ME-12 single
directional microphone (sold separately).

MEN

U

INDEX

REC

STOP

ERA

SE

MICSENS

CONF

DICT

Summary of Contents for DS-2000

















































Reviews: