![background image](http://html1.mh-extra.com/html/olympus/dp72/dp72_instructions-manual_4238889007.webp)
DP72
4
Intel 945 or later
Intel Pentium 4, 620 (2.8 GHz or greater).
Intel Core2 Duo 1,8 GHz or greater [Core2 Duo E6400, 2.13 GHz or greater recommended]
Recommended Computer Specifications -- Desktop Computer --
1. Computer requirements
PC/AT compatible
CPU
Chipset
RAM
DDR2/DDR3, 512 MB or more. [In the case of Windows Vista, 1GB or more recommended]
[PC2-4200 or greater, dual-channel DDR2, 1 GB or greater recommended]
HDD
Free space 500 MB or more
Graphic
PCI Express X16 VGA card with 1280 x 1024 or more and 32-bit color capability.
On-board graphic also acceptable.
Extension slot
PCI Express Rev. 1.0a or later.
Half-size or low-profile PCIe board compatible (106.7 mm x 174.6 mm)
OS
2. CPU
We do not guarantee operation if the computer uses a CPU other than or incompatible with Pentium 4 or uses a non-Intel
chipset.
3. HDD free space
The HDD free space refers to the space that does not cause a special problem when the system is installed or run. The
space required for saving an image file in the HDD is slightly more than 4 MB with a 1360 x 1024-pixel (24-bit) non-
compressed image and slightly more than 38 MB with a 4140 x 3096-pixel (24-bit) non-compressed image. In consequence,
the HDD should also provide a considerably large space for saving these image files.
When saving movies in the HDD stack, the space required for saving a movie is about 20 MB (max.) per second. The
movie recording time is limited according to the HDD free space.
4. RAM
If a RAM other than a PC2700 or greater, dual-channel DDR/DDR2 RAM is used, the full-size live frame rate may drop.
5. Monitor
Us an Adobe RGB compatible monitor when using the camera head in the Adobe RGB mode.
Optimum color reproduction is not available if the sRGB/Adobe RGB setting of the camera head does not match the
setting of the monitor.
6. Sequential connection of PCIe units
Up to two PCIe units including the DP72 and a PCI interface board of the DP71/DP70/DP30BW or FV1000 (FV10-ASW-V1.5
or later) can be connected in series. Series connection of the FV300/FV500 is not possible.
However, their simultaneous operation is not available so it is required to select either PCI interface operation.
7. Power supply
The PCIe interface board should be powered by connecting the FDD power supply connector from the ATX power supply
in the computer.
If your computer does not have an available FDD power cable or the FDD power cable is too short, use the provided
HDD(4-pin) to FDD power conversion cable for the power supply.
And if your computer does not have an available HDD power cable (4-pin), use the provided SATA-to-HDD(4-pin) power
conversion adapter and HDD(4-pin)-to-FDD power conversion cable for the power supply.
Windows Vista Business/Ultimate.
Windows XP Professional SP2 or later. (Not compatible with x64 Edition.)
Language: English or Japanese.
Power
250 W or more. (With CE marking)
*
There needs to be the FDD power cable, HDD(4-pin) power cable or SATA power cable which is not
occupied.
Summary of Contents for DP72
Page 38: ...MEMO...
Page 39: ......