DMTA-20006-01EN, Rev. B, February 2014
Chapter 1
20
1.3
Required Tools for Scanner Setup
The few tools required for the assembly, reconfiguration, and adjustment of the
scanner are included with the COBRA scanner (see Table 4 on page 20 and Figure 1-6
on page 20).
Figure 1-6 Tools included with the COBRA scanner
Table 4 Required tools (included with the scanner)
Quantity
Description
1
T6 Torx screw driver
1
2.5 mm hexagonal screw driver
1
Phillips #0 screw driver
1
Loom installation tool (to insert cables and tubes in the protective sleeve)
Summary of Contents for COBRA
