background image

CH10/CH20

D. REPAIR PROCEDURE

D-3

2. Observation Tube (C20-BI45) Adjustment

2-1 Adjustment procedure

1. Preparations

(See 2-2 Preparations, D-3.)

2. Left / right optical axis adjustment, parfocality adjustment

(See 2-3 Left / right optical axis, parfocality adjustment, D-4.)

3. Exit pupil center check

(See 2-4 Exit pupil center check, D-5.)

2-2 Preparations

See Disassembly and assembly procedures
(C-11).

ž 

Assemble the MIRROR FRAME 

 with the

two screws (CUKK3X6SA *3) temporarily.

ž 

Assemble the PARTS, 

ƒ

-

, temporarily

without the COVER

.

ž 

Fix the R-SLEEVE 

 and the HELICOID

ASS’Y 

 in the center.

 
ž 

Set them in the above-mentioned state on
the microscope frame.

 

(When microscope frame is not available,
use jig (B2KC0403).)

 
 

ž 

Left/right optical axis adjustment

 

As shown in Figure-A, set the
standard objective (KN0015) and
the standard eyepiece (KN0048;
with adapter-1).

ž 

Tube length adjustment

 

Set the standard objective (KN0016),
the standard eyepiece (KN0048;
with adapter-1), and the focusing
telescope (FT-36).

ž 

Exit pupil center check

 

Set NEA4X objective and the center-
ing telescope (KN0029).

 Standard objective for optical axis (KN0015)
Standard objective for tube length (KN0016)
NEA4X objective

 Standard eyepiece (KN0048; with adapter-1)
 Centering telescope (KN0029)
 Focusing telescope (FT-36)

Figure-A

Summary of Contents for CH10
































Reviews: