44
2. Errors displayed after data transfer (during printing)
Description
Cause
Corrective Measures
• The printer cover is open.
• There is paper remaining in the
printer.
• The ink ribbon is not installed.
• The printer is out of ink ribbon.
• Paper of a different size than the
setting is installed in the printer.
• An error has occurred.
• Ink ribbon of a different size than
the setting is installed in the
printer.
• The printer does not send back any
response.
• OK button: Cancels printing.
• Close the printer cover.
• OK button: Cancels printing.
• Take out the paper.
• OK button: Cancels printing.
• Check whether ink ribbon is installed in
the printer.
• Replace the ink ribbon (refer to page
154).
• OK button: Cancels printing.
• Either insert different paper or change
the paper setting (refer to page 33).
• Contact the nearest service department
of Olympus.
• OK button: Cancels printing.
• Either insert different ink ribbon or change
the paper setting (refer to page 33).
• OK button: Cancels printing.
• Turn the printer power off and then on
again.
